High Precision Fluid Dispensing Pump, Models P2100SD
P2100 SD
The P2100 SD micro dispensing system
is intended for adhesive or other fluids of different
viscosity levels. It dispenses in small dots or in a line
with high accuracy. Shots are adjustable through a
micrometer.
The system inlet and outlet are fitted
with Luer fittings to accept the syringe tube and syringe
needle. The syringe tube has a special adapter to accept air
for more control of the shot volume.
The SAC1100 or CLC1100 controller
controls the P2100 SD. Both controllers can also control
standard P2100 modules.
P2100 SD
SPECIFICATIONS
|
PUMP
MODULE
|
PISTON
DIA.
|
PRESETTABLE SHOT RANGE
|
FLUID
PRESSURE, MAX
|
FLUID
INLET (UNF)
|
FLUID
OUTLET (UNF)
|
|
PPL0802
|
0.125
in
|
0.010 -
.050 ml
|
400
psig.
|
10 -
32
|
10 -
32
|
|
PPL0804
|
0.250
in
|
0.08 - .400
ml
|
100
psig.
|
10 -
32
|
10 -
32
|
|
Repeatability
|
:
99.5%
|
|
Accuracy
|
:
99.2%
|
|
Viscosity
|
: 100,000
cp (max)
|
|
Stroke
Adjustment
|
: 0.5
in
|
|
Operating
Cycle (fixed)
|
: Alumina
Ceramic
|
|
Accuracy
|
:
Polyethylene, 316SS, Ceramic,
Viton, Teflon
|
|
Repeatability
|
: .001"
resolution micrometer
|
|
Pump
Module Dimensions
|
: 1 1/8 x
8 in
|
|
Pump
Module Weight
|
: 2
lbs.
|
|
|
|
|
Controllers
|
: SAC
1100
|
|
|
CLC
1100
|
|
Repeatability is
the measure of the consistency of shot volume
delivery, obtained by calculating the ratio of any
shot volume to the average shot volume of a
particular pump stroke setting multiplied by
100.
Accuracy is
determined by comparing actual shot volume to the
preset shot volume, calculated as the quotient of
the actual shot volume to the preset shot volume,
multiplied by 100.
Data in website is
based on tests performed using water as the pumping
media.
PATENT
PENDING
Teflon® and
Viton® are registered trademarks of DuPont Dow
Elastomers.
|
P2100 SD
FEATURES
|
Pump
module is easy to maintain and
clean
|
|
Autoclavable pump
components
|
|
Adaptable
for remote operation
|
|
Minimum
dead volume for easy priming
|
|
Purging
with minimum effort
|
|
Programmable, presettable
shot volume
|
|
Clean
material cut-off
|
|
Micrometer
adjustable at .001 in resolution
|
|
Relay or
PLC controller abvailable
|
|
To Order or for
Additional
Information:
E-mail:
webmaster@semiconweb.net
|
Note: All information
contained in this catalog is subject to engineering change
without notice.
P4000 | P3000/2000 | P2100 | M3000/2000 | M2100/2200 | SS5000 |
BACK TO FLUID PUMP MAIN
Please complete the form below so we can serve you more efficiently.
R&D Semiconductor Equipment . . . For Sale!!!
Note: The following equipment were purchased new are slightly used for R&D application only. The number of substrates processed is very minimal, so, all equipment are in very good condition. Ages are more or less 5 years old.
| Item
| Equipment
| Model
| Notes
| Voltage/Current
| Dimensions
|
| 1
| SK Vapor Dryer
| 51028
| IPA Dryer
| 240V/70A
| 45W X 24D X 100H
|
| 2
| AEP Stripper
| UC-7550
| Flat Panel Stripper
| 208V/200A
| 74W X 50D 94H
|
| 3
| O3 Detector
| IN 2000-3
| Ozone Monitor
| 120V/1.5A
| N/A
|
| 4
| Steag Wet Etch
| FPD-400
| Wet Etch with Robot
| 208V/60A
| 71W X 51L X 65H
|
| 5
| AKT RIE
| 1600-ETCH
| 2 Etch Chambers
| 208V/240A
| Cluster Tool
|
| 6
| AKT PVD
| 1600-PVD
| 2 Sputter Chambers
| 208V/320A
| Cluster Tool
|
| 7
| Steag Coater
| FPD 400
| Resist Coater/Developer
| 208V/175A
| 115W X 82D X 73H
|
| 8
| Tamarack
| T-300
| Photo Lithography Tool
| 208V/15A
| 67W X 59D X 103H
|
Please contact us at:
OLM Enterprises
33453 Western Avenue, Union City, CA 94587
Tel: (408)259-1900 Fax: (408)259-1990
Toll Free Tel/Fax: 1-888-925-8293
E-mail: info@semiconweb.net
AME Parts, R&D Semiconductor Equipment | Engineering, Design, and Manufacturing Services | Measurement and Turbo Balancing System, Semiconductor Equipment and Related Major Components | Fluid Dispensing & Metering Pumps | Ion Implanter Parts, R & D Semiconductor Equipment | LAM Systems Parts & More Semiconductor Equipment | Mass Flow Controller List #1 | Mass Flow Controller List #2 | Mass Flow Controller List #3 | MFC’s, Turbo Balancing System, Semi Equipment, Etc. | Mass Flow Controller Related Products | Microscopes, R&D Semiconductor Equipment | New Parts List, R & D Semiconductor Equipment | Photos of Some Equipment and Parts | Semiconductor Equipment with Related Major Components | Test Systems & Semiconductor Equipment | R & D Semiconductor Equipment, Tegal Parts | Vacuum Pumps | Varian Parts List, Semiconductor Equipment | Equipment For Sale Hot List | Equipment Wanted, List #1 | Equipment Wanted, List #2 | Equipment Wanted, List #3 | Used Semiconductor Equipment, Vacuum Systems, Pumps, Etc: fl01 | Used Semiconductor Equipment: Vacuum Systems, Lithography, Etc: fl02 | Used Semiconductor Equipment: Vacuum Systems, Lithography, Etc: fl02a | Used Semiconductor Equipment: Vacuum Systems, Lithography, Etc: fl02b | Used Semiconductor Equipment: Vacuum Systems, Lithography, Etc: fl02c | Vacuum Pumps: Turbo, Dry, Cryo, Etc.: fl03 | Semiconductor Back End Equipment, Etc.: fl04 | Helium Leak Detectors, Rebuilt: fl05 | Wafer Fab or Semiconductor Equipment: fl06 | Plasma Systems, Vacuum Pumps, Etc: fl07A | Vacuum Systems, Vacuum Pumps, Etc: fl07B | Vacuum Packaging Systems, Pumps, Power Supplies, Etc: fl08 | Used or Pre-Owned Semiconductor Equipment: fl09 | Semiconductor Equipment: fl10 | Semiconductor Equipment: fl11 | Semiconductor Equipment: fl12 | Semiconductor Equipment: fl13 | Semiconductor Equipment: fl14 | Semiconductor Equipment: fl15 | Semiconductor Equipment: fl16 | Eight Inch (8 Inch) Semiconductor Equipment: fl17 | Helium Leak Detector & Vacuum Pumps: fl18 | Vacuum Pumps: Oil, Turbo, Dry, Cryo, & More - fl18a | Helium Leak Detectors, RF Generators, Vacuum Pumps, Etc: fl19 | Novellus Parts, Concept One & Two, Wafer Fab Equipment, fl20 | Leybold Helium Leak Detectors, Converters, Turbo Pumps, Etc: fl21 | Various Helium Leak Detectors, Vacuum Pumps, Etc: fl22 | 6 Inch Wafer Fab Equipment, Back End Semiconductor Equipment, Etc: fl23 | Back End Semiconductor Equipment, 6 Inch Wafer Fab Equipment, Back End Equipment, Etc: fl24 | Used or Surplus Semiconductor & Back End Equipment, Etc: fl25 | Four Inch (4 Inch) Used, Surplus, Rebuilt, or Pre-owned Semiconductor or Wafer Fab Equipment, Etc. fl26 | 4 Inch Used, Surplus, Rebuilt, or Pre-owned Semiconductor or Wafer Fab Equipment, Etc. fl26a | 4 Inch Used, Surplus, Rebuilt, or Pre-owned Semiconductor or Wafer Fab Equipment, Etc. fl26b | Six Inch (6 Inch) Semiconductor or Wafer Fab Equipment Package, Etc. fl27 | Semiconductor Equipment: Ion Implanters, Furnaces, Resistivity Meter, Etc. fl28 | Semiconductor Equipment: Kokusai & TEL Furnaces, Ion Implanters, 4 Point Probe, Etc. fl29 | Semiconductor Equipment: Sputterers, Etchers, Steppers, Kokusai & TEL Furnaces, Ion Implanters, Etc. fl30 | Surplus Semiconductor Equipment: Ion Implanter, Furnaces, Resistivity Meter, Parts, Etc. fl31 | Surplus Semiconductor Equipment: Novellus 3290, Applied Materials Centura HP PVD, & Sputtered Films Inc 8600, Etc. fl32 | Semiconductor equipment & Online Business Opportunities | Business Opportunities Online & Internet Resources | Online & Internet Resources
Copyright ©1999 OLM Enterprises
|