Precision Fluid Dispensing Pump, Model SS5000; Semiconductor Equipment

Internet Cash Machines

Our site is
http://gonow.to/olmenterprises
gonow.to easy to remember web address service

Easy to reach, Easy to remember!

High Precision Fluid Dispensing Pump, Models SS5000

SS5000

The SS5000 dispenses adhesive and many other types of fluids through a disposable syringe tube. The SS5000 can be made to be adapted to the customer's own syringe tube. The dispenser is portable, hand-held, and easy to use. It can be mounted at any location, using a special mounting bracket. The syringe tube is fitted with a special adapter for better control of the shot volume.

SS5000 Syringe System maintains high repeatability and is a close loop system where no fluid is exposed.

Replacing a new syringe tube is easy, first, open the valve and slowly pull back the actuator lever through its knob. Then, loosen the adapter chuck and remove the used syringe tube and throw it away. To start the operation, close the valve and push the start button or an optional footswitch.

The customer has the choice of a relay controller or PLC controller. The PLC controller can be operated through the front panel switches or it can be connected to an IBM PC (or compatible) computer. The relay controller is operated only through the front panel switches or the footswitch terminal.

SS5000 SPECIFCATIONS

Repeatability

: 99.5%

Viscosity

: Low to high viscous fluid

Syringe Type

: 10 cc air-operated syringe tube

Stroke Incr./Syringe Tube

: 0.120" (max)

Cylinder Stroke

: 3.0" (max)

Air Requirement

: 100 - 120 psi.

Controllers

: SAC 1100 or CLC 1100

Repeatability is the measure of the consistency of shot volume delivery, obtained by calculating the ratio of any shot volume to the average shot volume of a particular pump stroke setting multiplied by 100.

Accuracy is determined by comparing actual shot volume to the preset shot volume, calculated as the quotient of the actual shot volume to the preset shot volume, multiplied by 100.

Data in website is based on tests performed using water as the pumping media.

PATENT PENDING

Teflon® and Viton® are registered trademarks of DuPont Dow Elastomers.

SS5000 FEATURES

Hand-held dispenser

Dispenses adhesives and abrasive fluid

Adaptable to customer's syringe

99.5% repeatability

Closed loop system

Choice of relay or PLC controller

Hydraulic drive

Dispenses in small to bigger dots or a line

Can dispense low to high viscous fluid

To Order or for Additional
Information:

E-mail: webmaster@semiconweb.net

P4000 | P3000/2000 | P2100 | M3000/2000 | M2100/2200 | P2100 SD

BACK TO FLUID PUMP MAIN

Please complete the form below so we can serve you more efficiently.

R&D Semiconductor Equipment . . . For Sale!!!

Note: The following equipment were purchased new are slightly used for R&D application only. The number of substrates processed is very minimal, so, all equipment are in very good condition. Ages are more or less 5 years old.

Item	Equipment	Model	Notes	Voltage/Current	Dimensions
1	SK Vapor Dryer	51028	IPA Dryer	240V/70A	45W X 24D X 100H
2	AEP Stripper	UC-7550	Flat Panel Stripper	208V/200A	74W X 50D 94H
3	O3 Detector	IN 2000-3	Ozone Monitor	120V/1.5A	N/A
4	Steag Wet Etch	FPD-400	Wet Etch with Robot	208V/60A	71W X 51L X 65H
5	AKT RIE	1600-ETCH	2 Etch Chambers	208V/240A	Cluster Tool
6	AKT PVD	1600-PVD	2 Sputter Chambers	208V/320A	Cluster Tool
7	Steag Coater	FPD 400	Resist Coater/Developer	208V/175A	115W X 82D X 73H
8	Tamarack	T-300	Photo Lithography Tool	208V/15A	67W X 59D X 103H

Please contact us at:

OLM Enterprises
33453 Western Avenue, Union City, CA 94587
Tel: (408)259-1900 Fax: (408)259-1990
Toll Free Tel/Fax: 1-888-925-8293

E-mail: info@semiconweb.net